Photos

Clear Filters | 1001 - 1020 of 1239 results

Maintaining the Stratotanker

Airman 1st Class Gerald R. Meagher, 108th Wing Maintenance Squadron, New Jersey Air National Guard, greases a KC-135R Stratotanker wing landing gear axle brake collar May 18, 2014, at Joint Base McGuire-Dix-Lakehurst, N.J. (U.S. Air National Guard photo by Master Sgt. Mark C. Olsen/Released)
Details Download

Maintaining the Stratotanker

Senior Airman Andrew V. Balint, 108th Wing Maintenance Squadron, New Jersey Air National Guard, measures the diameter of a KC-135R Stratotanker wing landing gear axle during an inspection May 18, 2014, at Joint Base McGuire-Dix-Lakehurst, N.J. (U.S. Air National Guard photo by Master Sgt. Mark C. Olsen/Released)
Details Download

Maintaining the Stratotanker

Staff Sgt. Ivan R. Martinez, 108th Wing Aircraft Maintenance Squadron, New Jersey Air National Guard, cleans a landing gear strut during the inspection of a KC-135R Stratotanker wing landing gear axle May 18, 2014, at Joint Base McGuire-Dix-Lakehurst, N.J. (U.S. Air National Guard photo by Master Sgt. Mark C. Olsen/Released)
Details Download

Maintaining the Stratotanker

Senior Airman Edgar J. Perez, 108th Wing Global Mobility Squadron, wipes clean a KC-135R Stratotanker wing landing gear axle May 18, 2014, at Joint Base McGuire-Dix-Lakehurst, N.J. (U.S. Air National Guard photo by Master Sgt. Mark C. Olsen/Released)
Details Download

Maintaining the Stratotanker

Senior Airman Carlos Carcamo, left, 108th Wing Maintenance Squadron, and Staff Sgt. Ivan R. Martinez, 108th Wing Aircraft Maintenance Squadron, both with the New Jersey Air National Guard, clean axle parts during the inspection of a KC-135R Stratotanker wing landing gear axle May 17, 2014, at Joint Base McGuire-Dix-Lakehurst, N.J. (U.S. Air National Guard photo by Master Sgt. Mark C. Olsen/Released)
Details Download

Maintaining the Stratotanker

Staff Sgt. Herbert L. Grant, left, and Senior Airman Jason D. Afanador, both with the 108th Wing Maintenance Squadron, New Jersey Air National Guard, seal a wing tank vent box on a KC-135R Stratotanker May 17, 2014, at Joint Base McGuire-Dix-Lakehurst, N.J. (U.S. Air National Guard photo by Master Sgt. Mark C. Olsen/Released)
Details Download

Maintaining the Stratotanker

Tech. Sgt. Jason T. Feibisch, left, writes down diameter readings as Senior Airman Andrew V. Balint, measures a KC-135R Stratotanker’s wing landing gear axle during an inspection May 17, 2014, at Joint Base McGuire-Dix-Lakehurst, N.J. Both Airmen are with the 108th Wing Maintenance Squadron, New Jersey Air National Guard. (U.S. Air National Guard photo by Master Sgt. Mark C. Olsen/Released)
Details Download

Maintaining the Stratotanker

Senior Airman Andrew V. Balint, 108th Wing Maintenance Squadron, New Jersey Air National Guard, measures the diameter of a KC-135R Stratotanker wing landing gear axle during an inspection May 17, 2014, at Joint Base McGuire-Dix-Lakehurst, N.J. (U.S. Air National Guard photo by Master Sgt. Mark C. Olsen/Released)
Details Download

Maintaining the Stratotanker

Staff Sgt. Ivan R. Martinez, left, 108th Wing Aircraft Maintenance Squadron, and Tech. Sgt. Mike R. Baber, 108th Wing Maintenance Squadron, both with the New Jersey Air National Guard, clean axle parts prior to the inspection of a KC-135R Stratotanker wing landing gear axle May 17, 2014, at Joint Base McGuire-Dix-Lakehurst, N.J. (U.S. Air National Guard photo by Master Sgt. Mark C. Olsen/Released)
Details Download

Maintaining the Stratotanker

Staff Sgt. Ivan R. Martinez, left, 108th Wing Aircraft Maintenance Squadron, and Tech. Sgt. Tyrice J. Pressley, 108th Wing Maintenance Squadron, both with the New Jersey Air National Guard, cap a hydraulic cable prior to the inspection of a KC-135R Stratotanker wing landing gear axle May 17, 2014, at Joint Base McGuire-Dix-Lakehurst, N.J. (U.S. Air National Guard photo by Master Sgt. Mark C. Olsen/Released)
Details Download

Maintaining the Stratotanker

Senior Airman Carlos Carcamo, 108th Wing Maintenance Squadron, New Jersey Air National Guard, disconnects a hydraulic cable prior to the inspection of a KC-135R Stratotanker wing landing gear axle May 17, 2014, at Joint Base McGuire-Dix-Lakehurst, N.J. (U.S. Air National Guard photo by Master Sgt. Mark C. Olsen/Released) (This image was cropped to focus on the subject of the image)
Details Download

CEs get some good OJT by building a shed

Airman 1st Class Daniel Bennett, an engineer assistant with the 108th Civil Engineers Squadron, inspects the secureness of the wall for a wooden shed being built at the CEs warehouse in Joint Base McGuire-Dix-Lakehurst, N.J. May 18, 2014. Bennett designed a 10-by-10 shed and is helping in the construction of the structure as part of his on-the-job training. (U.S. Air National Guard photo by Tech. Sgt. Armando Vasquez/Released)
Details Download

CEs get some good OJT by building a shed

Senior Airman Ross Cundey, left, and Staff Sgt. John Caporaso, both structural specialists with the 108th Civil Engineers Squadron, ensure the wall frame is leveled to the floor base before it is secured. Cundey and Caporaso, along with three other civil engineers, were building a 10-by-10 wooden shed at the CEs warehouse in Joint Base McGuire-Dix-Lakehurst, N.J. May 18, 2014, as part of their on-the-job training during drill weekend. (U.S. Air National Guard photo by Tech. Sgt. Armando Vasquez/Released)
Details Download

CEs get some good OJT by building a shed

Civil engineers with the 108th Civil Engineer Squadron place one of the four walls onto the base of the floor for a wooden shed being built at the CEs warehouse in Joint Base McGuire-Dix-Lakehurst, N.J. May 18, 2014. As part of their on-the-job training, the CEs were tasked with designing and constructing a 10-by-10 wooden shed. (U.S. Air National Guard photo by Tech. Sgt. Armando Vasquez)
Details Download

CEs get some good OJT by building a shed

Senior Airman Delvin Reneau, an engineer assistant with the 108th Civil Engineers Squadron, prepares to hammer a nail into the wooden studs for the wall frame of a 10-by-10 wooden frame being built at the CEs warehouse in Joint Base McGuire-Dix-Lakehurst, N.J. May 18, 2014. Reneau, along with four other civil engineers, were building a shed as part of their on-the-job training during drill weekend. (U.S. Air National Guard photo by Tech. Sgt. Armando Vasquez/Released)
Details Download

CEs get some good OJT by building a shed

Senior Airman Ross Cundey, left, and Airman 1st Class Andrew Speight, both structural specialists with the 108th Civil Engineers Squadron, prepare to hammer nails into the wooden studs of the wall frame for a 10-by-10 wooden frame being built at the CEs warehouse in Joint Base McGuire-Dix-Lakehurst, N.J. May 18, 2014. Cundey and Speight, along with three other civil engineers, were building a shed as part of their on-the-job training during drill weekend. (U.S. Air National Guard photo by Tech. Sgt. Armando Vasquez/Released)
Details Download

CEs get some good OJT by building a shed

Staff Sgt. John Caporaso, a structural specialist with the 108th Civil Engineers Squadron, cuts a one-inch piece of ply-wood that will be used in a header for the door of a wood shed. Caporaso, along with four other civil engineers, were building a 10-by-10 wooden shed at the CEs warehouse in Joint Base McGuire-Dix-Lakehurst, N.J. May 18, 2014, as part of their on-the-job training during drill weekend. (U.S. Air National Guard photo by Tech. Sgt. Armando Vasquez/Released)
Details Download

CEs get some good OJT by building a shed

Staff Sgt. John Caporaso, a structural specialist with the 108th Civil Engineers Squadron, marks cutting lines on a two-by-six piece of wood at the CEs warehouse in Joint Base McGuire-Dix-Lakehurst, N.J. May 18, 2014. Caporaso was preparing the door headers for the wooden shed being built by the civil engineers as part of their on-the-job training during drill weekend. (U.S. Air National Guard photo by Tech. Sgt. Armando Vasquez/Released)
Details Download

CEs get some good OJT by building a shed

Airman 1st Class Salvatore Ceraldi, front, and Tech. Sgt. Michael McBride, both with the 108th Civil Engineers Squadron, discuss the design plans for the 10-by-10 shed. Ceraldi, a structural specialist, was tasked with building the wooden structure of the shed as part of his on-the-job training. (U.S. Air National Guard photos by Tech. Sgt. Armando Vasquez)
Details Download

CEs get some good OJT by building a shed

Airman 1st Class Daniel Bennett, front, an engineer assistant with the 108th Civil Engineers Squadron, measures the distance between two wooden studs for the floor frame of a wooden shed being built at the CEs warehouse in Joint Base McGuire-Dix-Lakehurst, N.J. May 17, 2014, while Airman 1st Class Salvatore Ceraldi, a structural specialist also with the 108th CES, ensures the other wooden studs have been secured to the frame. Bennett and Ceraldi were getting some on-the-job training. (U.S. Air National Guard photo by Tech. Sgt. Armando Vasquez/Released)
Details Download